Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: tashby on July 19, 2007, 09:23:35 PM

Title: LAZYCAM
Post by: tashby on July 19, 2007, 09:23:35 PM

WHEN TRANSFERRING DESIGN FROM LAZYCAM TO MACH3 ONLY GET PARTIAL OF DESIGN IN MACH3.
I AM VERY NEW TO ALL OF THIS BUT VERY MUCH WANT TO LEARN.
HAVE BUILT A MACHINE AND HAVE IT RUNNING.
ANY HELP WOULD BE MUCH APPREACIATED.

Title: Re: LAZYCAM
Post by: Hood on July 20, 2007, 07:17:50 PM

You might get more help if you post this in the LazyCAM section of the forum.
Hood