Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: cncman on April 26, 2018, 07:02:42 PM

Title: MK-IV Mach3 motion card setup
Post by: cncman on April 26, 2018, 07:02:42 PM

Hi guys!
Can anyone help me on how to setup this card in Mach3? Developer's instructions are not clear ( to me at least).
Any step/screenshot would be really helpfull!
Thans in advance for any help!
Vasili

Title: Re: MK-IV Mach3 motion card setup
Post by: TPS on April 27, 2018, 01:25:33 AM

do you have this: https://256.makerslocal.org/wiki/images/3/38/MACH3-USBCARD-MK-Instructions.pdf
Manual ?

Title: Re: MK-IV Mach3 motion card setup
Post by: cncman on April 27, 2018, 04:13:05 AM

This seems to be more clearly than developer's one! I'll give it a try!
Thank's

Title: Re: MK-IV Mach3 motion card setup
Post by: joeaverage on April 27, 2018, 04:16:06 AM

Hi,
trying to understand Chinese instructions is tough, and be thankful that you have some instructions at all, most of the Chinese stuff doesn't and once they've got your money
they don't care.

Craig

Title: Re: MK-IV Mach3 motion card setup
Post by: cncman on April 27, 2018, 07:47:10 AM

Some of them helps a lot Craig, but the rest of them are just to take your money as you said! Google translation isn't working well for chineese to english and vice versa.I'm thankfull by your experience and as i help others, same You do guys!
Thank you!