Machsupport Forum
Mach Discussion => Mach4 General Discussion => Topic started by: JohnT on April 25, 2018, 11:18:41 AM
-
I have an issue with Mach 4 which I am unable to resolve. It runs fine through about 750 lines of g-code and then starts to surge. I have a link to a youtube video and its around the 25 second mark. https://www.youtube.com/watch?v=VVcAZpRVGns. [img]http://i11.photobucket.com/albums/a167/S76911Driver/1pocket.jpg/img] Here is where the gcode starts this issue.http://i11.photobucket.com/albums/a167/S76911Driver/1pocket.jpg. I am using windows 10. I'll provide more info if anyone can help.
-
Ok this is driving me nuts. I have narrowed down this problem to one line in the g-code which is line 758. right when it gets there the machine starts its surging every time. I do not see any errors in the g-code or am I missing something?http://i11.photobucket.com/albums/a167/S76911Driver/IMG-0006.jpg
-
we are very sorry, that our Magic glas ball can not see the line 758 of your code.
-
did the link not work?
-
Your image of the G-code on screen starts at line 767, so line 758 is not visible.
It would be much better to post a link to the actual G-code so others could
try running it.
-
Solved, g-code was fine but apparently the computer was just running out of RAM. New computer, new install of M4 and ESS and now runs like a top. ;D