Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: RCR Design on March 29, 2018, 12:06:43 PM

Title: Mach4: Converting my Profile from english to metric
Post by: RCR Design on March 29, 2018, 12:06:43 PM

Hi,

I am currently running my machine with Mach4 in English (Standard), I want to create another profile that is setup for Metric.

I want the ability to have two profiles in order to easily switch between Standard & Metric machine settings.

My question is:
Is there an easy way to convert the motor settings (Counts, Velocity, Acceleration) values in "Mach Configuration" to Metric values for the new profile?

The machine is tunned with these settings for the English(Standard) Profile, there should be translation or conversion method...

any help wpould be appreciated...

Thanks