Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: rickinbeachcrest on March 25, 2018, 03:14:53 PM

Title: Underlined DRO's
Post by: rickinbeachcrest on March 25, 2018, 03:14:53 PM

This is kind of a strange one.
Just finished a new Screen and all of the DRO's are underlined.  But on the computer I was designing and testing the new screen, there are no underlined DRO's.  And on the computer running the CNC, the old screen set did not have any underlined DRO's. 

I'm using R3.042.040

I can live with it, but the rest of the screen looks so good.

Thanks for any help.
Rick

Title: Re: Underlined DRO's
Post by: ger21 on March 25, 2018, 04:40:38 PM

Boxed DRO's and Graphics in General Config.

Title: Re: Underlined DRO's
Post by: rickinbeachcrest on March 25, 2018, 05:18:16 PM

Thank you Gerry.
I was hoping it was something easy like that.
Rick