Machsupport Forum

Mach Discussion => VB and the development of wizards => Topic started by: birillo1959 on March 13, 2018, 07:25:30 AM

Title: G31Probing Arrays
Post by: birillo1959 on March 13, 2018, 07:25:30 AM

(http://)good morning
I downloaded (in the section MACH TOOL BOX) G31Probing Arrays.zip for external / internal surveys, the macro G31IntPolArrayV2.01.txt does not give me problems, the macroG31ExtPolArrayV2.01.txt gives me error (I enclose) in the forum talk about a file M1289 .m1s I can not find it, can it be the problem?
solutions?
(http://)

Title: Re: G31Probing Arrays
Post by: birillo1959 on March 13, 2018, 07:26:48 AM

(http://)

Title: Re: G31Probing Arrays
Post by: birillo1959 on March 13, 2018, 07:31:15 AM

(http://)

Title: Re: G31Probing Arrays
Post by: BR549 on March 14, 2018, 05:07:45 PM

That line SHOULD read as

#122=Fix[#122]

Title: Re: G31Probing Arrays
Post by: BR549 on March 14, 2018, 05:32:54 PM

The only other thing you need is M1299 which sets up the Values for the arrays to use

Title: Re: G31Probing Arrays
Post by: birillo1959 on March 15, 2018, 03:22:36 AM

OK it works well !!! I double checked in the MACH TOOL BOX section the file contains error.
thanks BR549 ;) ;)