Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: bigforkg on March 02, 2018, 12:27:44 PM
-
hello, I have spent at least 3 hours looking and cant find the " Driver Test program". Is it in the trial version of Mach3? What I have is a Gecko G540, UC100 controller, windows 10 64 bit laptop.
thanks in advance for the help.
-
Hi,
DriverTest.exe is a means of testing a parallel port. You don't (can't) have a parallel port ergo DriverTest.exe won't work. It should still be in the main
Mach3 folder.
Craig
-
Hi Bigforkg,
When you installed Mach3 for use with UC100 you would not have installed the Parallel Port drivers so DriverTest.exe would not have been copied into your Mach3 folder.
Tweakie.
-
Thank you Crig and Tweakie
What about the " blue screen of death" in the mach3 manual? Is that not a factor because of the UC100?
-
No. Or yes?
You don't have to worry about the Drivertest with the UC100.