Machsupport Forum
Mach Discussion => Mach4 General Discussion => Topic started by: cnc-kursk on February 06, 2018, 05:01:00 AM
-
Why path is crap?!
Only diagonal lines in program.
Any suggestions?
(http://preview.ibb.co/gp2Lix/NC_1.png)
(http://image.ibb.co/fgXNVc/NC_3.png)
(http://preview.ibb.co/e5M5ix/NC_2.png)
-
Hi,
post your Gcode so we can have a look at your toolpath.
Craig
-
It's attached already
http://www.machsupport.com/forum/index.php?action=dlattach;topic=36533.0;attach=48126
-
Possibly just a graphics issue.
Reduce the feedrate by half and see what the sim'd path looks like.
Justa guessin',
Russ
-
My laptop, with intel HD3000 grapics, displays it just fine in both Mach3 and Mach4.
Must be something on your end.
-
Hi,
I just loaded the file and got a toolpath like yours a series of diagonal cuts. That's what the Gcode is telling the machine to do and the machine is doing it.
What were you expecting the code to do?
Craig
-
If you look closely at picture of his diagonal line they are not flat but distorted in the Z axis. Mine looked perfectly smooth.
Mike