Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: GaryWilliams on February 05, 2018, 06:08:42 AM

Title: XML NET Profile message
Post by: GaryWilliams on February 05, 2018, 06:08:42 AM
Hi All,

Got a strange one here.  Whenever I runup or close down Mach3, I get an "XML NET Profile message"  "Load warning hex 0x18 invalid character on line 1 in position 39843".  It doesn't interfere with Mach3.  Any idea how to fix this?

Cheers

Gary