Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Csaba911 on July 08, 2007, 06:11:43 PM

Title: How to reduce overall workspeed
Post by: Csaba911 on July 08, 2007, 06:11:43 PM

HI, I was gonna ask if it was possible to work some defined percentage slower than the machine would operate . But not line by line. Just reduced speed?

Title: Re: How to reduce overall workspeed
Post by: Hood on July 09, 2007, 03:48:50 PM

Not sure if this is what you are meaning but there is a Feed OverRide slider that you can use to slow things down.
Hood