Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: Firechief on January 14, 2018, 12:36:00 PM

Title: Following top of sheet with Z
Post by: Firechief on January 14, 2018, 12:36:00 PM

Can there be a way of following top of your sheet? I have to cut a 1/16” slot .080 deep in a flat sheet of PVC 4’ X 5’. With turn and lines. The sheet has a change of .003 to .006 in thickness. I need to try and hold .080 as close as I can.

Just a long shot

Title: Re: Following top of sheet with Z
Post by: TOTALLYRC on January 14, 2018, 06:14:05 PM

Look for a program called Autoleveler. It is normally used for PCB work but it may do what you want.

Mike.