Machsupport Forum
Mach Discussion => Mach4 General Discussion => Topic started by: frankg521 on January 04, 2018, 03:46:17 PM
-
I have just started a build and mach4 with Darwin. the pulse train is not smooth. also their is nose in the Darwin test
Art can you take a look and help. I have just spent $225 on mach4 and Darwin because I have had mach 3 for years with out a problem
Frank
How do I attach my Mach4 profile?
-
Hi Frankg521,
Mach4 is quite demanding on a PC, particularly if that PC is required to provide the pulse train for Darwin operation. Some PC's can handle it and some can't so the best all-round solution is to use an external motion controller. OK it's a bit more expense but, you will find, it is well worth it in the long run.
There are many Mach4 motion controllers for you to choose from. I started out using Darwin now I use an ESS on one machine and a 57CNC on another, it is just a matter of choice (and of course, selecting one that offers good customer support).
Tweakie.
-
so can I get my licence for Darwin refunded??
-
I don't think so :)
Tweakie.