Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Csaba911 on July 05, 2007, 07:27:36 PM

Title: Homing after work has completed
Post by: Csaba911 on July 05, 2007, 07:27:36 PM

probably another stupid question. After my work is done and I want to go with all Axis to the Machine Coordinates Zero (Home) how do I do that? Without disabling soft limits or jogging ?

Title: Re: Homing after work has completed
Post by: vmax549 on July 05, 2007, 10:41:21 PM

If all else fails from the main screen push the softlimits button to turn them off and then push the refhome button. THat works most of the time(;-) TP

Title: Re: Homing after work has completed
Post by: stirling on July 06, 2007, 04:31:06 AM

don't know the full ins n outs but G28 works for me

Title: Re: Homing after work has completed
Post by: Brian Barker on July 09, 2007, 09:28:53 PM

Try this
G53 G0 Z0.0
G53 G0 X0.0 Y0.0

That should do it

Thanks
Brian

Title: Re: Homing after work has completed
Post by: vmax549 on July 09, 2007, 09:32:39 PM

Or you could just push the home button on the keyboard (;-) TP