Machsupport Forum

Mach Discussion => VB and the development of wizards => Topic started by: JimAndi on December 17, 2017, 11:33:41 AM

Title: How to Rest the Spindle Speed
Post by: JimAndi on December 17, 2017, 11:33:41 AM
Hello All,

I am looking how to reset the Spindle Speed back to 100%. If the user reduces the Spindle Speed (70%) I want the tool change to reset the Spindle Speed to 100% before it start running the new tool.

Thanks,

Jim
Title: Re: How to Rest the Spindle Speed
Post by: TPS on December 17, 2017, 11:51:07 AM
oembutton(183) resets the override
Title: Re: How to Rest the Spindle Speed
Post by: JimAndi on December 20, 2017, 10:23:06 AM
 :) that worked.

Thanks!!!