Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: poppabear on July 02, 2007, 09:57:07 PM

Title: Experimenters PLC, for High I/O, Stepper controls, and Analog
Post by: poppabear on July 02, 2007, 09:57:07 PM

For the curious look this site over, you can program them in ladder and VB!!

http://www.tri-plc.com/

run non-syncronous steppers, upto 300 I/O, and analog I/O

Scott

Title: Re: Experimenters PLC, for High I/O, Stepper controls, and Analog
Post by: Graham Waterworth on July 03, 2007, 03:22:07 PM

Hi Scott,

this is the one I am playing about with.

http://www.audon.co.uk/cusb30r.html

Graham.