Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: customfabshop on June 20, 2017, 12:34:55 PM

Title: Mach 4 Post Processor?
Post by: customfabshop on June 20, 2017, 12:34:55 PM

I purchased some new CNC which were loaded with Mach4 and I am using Mach3. My RhinoCam wants $1500 for upgrade to just do post processing for this mach4. I am trying to see if anyone used another psot processor for another software where it will work for Mach4. I have close to hundred different post processor it would be awesome to find this so I don't have to pay this upgrade on CAM and just use a different one in place of this. thanks Joey

Title: Re: Mach 4 Post Processor?
Post by: Steve Stallings on June 20, 2017, 01:39:20 PM

Mach4 emulates a Fanuc 21i control, so look to see if there is a post processor for this one.

Title: Re: Mach 4 Post Processor?
Post by: customfabshop on June 20, 2017, 02:42:41 PM

Yes I have 4 different one and I just spent $1500 since I thought I was up against the wall...lol guess I need to be more patient next time and wait for reply. I will try it until they generate the new post '

Title: Re: Mach 4 Post Processor?
Post by: dude1 on June 20, 2017, 06:47:19 PM

Fusion360 has one for M3 and M4