Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: andrewbishop66 on June 22, 2007, 06:50:30 PM

Title: lazy cam help
Post by: andrewbishop66 on June 22, 2007, 06:50:30 PM

I cant get lazy cam pro to load this file can someone try for me

lazy cam 2.02


Thanks Andrew

Title: Re: lazy cam help
Post by: Chaoticone on June 22, 2007, 09:12:28 PM

It loaded fine for me. I'm using version 2.076 pro version.

Brett

Title: Re: lazy cam help
Post by: BobsShop on June 22, 2007, 11:10:36 PM

Also loaded fine using Lazy Cam 2.05. 

Bob @ BobsShop

Title: Re: lazy cam help
Post by: BobsShop on June 22, 2007, 11:25:56 PM

Andrew, attached is a similar spacer that I drew recently with CADX11 and imported into LCAM.  Interesting to note, that I have four entities around the outside edge - when I loaded your file into LCAM the outside contained 257 entities - that was after cleaning and optimizing.  My drawing is only 2" X 4" though.

Since I was able to load your file the number of entities should not have caused a problem for you, but the complexity did raise some questions.

Bob @ BobsShop

Title: Re: lazy cam help
Post by: andrewbishop66 on June 23, 2007, 04:39:31 AM

thanks guys changing lazycam version solved problem

Andrew