Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: truckeic on May 28, 2017, 10:18:28 PM

Title: Newbie... How to set softlimits
Post by: truckeic on May 28, 2017, 10:18:28 PM
I am very new to all of this and I am converting harbour freight mill to CNC.
Using Mach 3.
I am trying to set my soft limits.. not having any luck...
Is there a step by step procedure..



Sent from my XT1635-01 using Tapatalk
Title: Re: Newbie... How to set softlimits
Post by: RICH on May 29, 2017, 07:30:20 AM
Here are some links that discuss setting soft limits. Also suggest reading the Mill Manual.

http://www.machsupport.com/forum/index.php/topic,26252.msg184948.html#msg184948

http://www.machsupport.com/forum/index.phpaction=dlattach;topic=11409.0;attach=14965

RICH