Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: basileul on May 22, 2017, 07:27:38 AM

Title: Using UC300 USB comunication hotkeys do not work
Post by: basileul on May 22, 2017, 07:27:38 AM

Hello,
When I changed the communication to USB, using the UC300, I can not move the axes with the arrow keys on the keyboard and I can not jog with the buttons on the screen. I noticed that if I hold the shift key pressed then the arrows and jog on the screen work just like when I was communicating on LPT and wanted to move quickly. How can I set up the keys as before using USB