Machsupport Forum
G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: Chip on June 20, 2007, 11:43:57 PM
-
Hi, Art, Brian
Could you look at this file, The two red objects don't offset properly, seem to import fine though.
Thanks, Chip
-
Hi, Art, Brian
I understand what your saying, This is a small object, LCam offsets it properly even the nose of the airfoil.
Just seems to fail in ether the start or end of offset routine though.
Update!!
I tried using .0001 Load Options "Connection Tol.
It worked Great!! Now!!
Thanks, Chip