Machsupport Forum
G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: Chip on June 18, 2007, 10:15:36 PM
-
Hi, Art
Mach3 Load in LCam 2.076 is not loading Points / Dots, see below file.
I load it into LCam, Post it, Then use Mach3 Load, No dots.
Thanks, Chip
-
Hello Chip,
That is Art's section of the code :) We had a look at it but I have no idea if he got it fixed :( Can you tell me if this is still a problem?
Thanks
Brian
-
Hi, Brian
It hasn't been fixed yet.
Thanks, Chip