Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: mirzabala on April 07, 2017, 12:04:34 AM

Title: change the coordinates
Post by: mirzabala on April 07, 2017, 12:04:34 AM

Hi,during the operations machine begins to change the cutting place and stops because of machine limit how  can l solve this problem,thanks

Title: Calibration change
Post by: mirzabala on April 09, 2017, 03:57:26 AM

Hi,during the operation the machine cordinates change and it cuts wrongly,l checked that the calibration on Y axe changed.What is the problem?

Any suggestion??