Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Plasmalex on March 31, 2017, 06:58:31 PM

Title: Cnc plasma torch on off
Post by: Plasmalex on March 31, 2017, 06:58:31 PM

Hi everyone , i need help to setup on off torch . I've run my table about 3 months and today my torch doesnt work. When i manualy clic on the maccro, he doesn't flash like he must do .. i dont change any setting .on diagnostic screen the output 1 (that i use to this application) dont flash  . I've try to uninstall and reinstall mach3 but still have problem .. any help would be apreciate ..

Title: Re: Cnc plasma torch on off
Post by: Plasmalex on April 01, 2017, 10:11:57 AM

Its ok i find ! .