Machsupport Forum
General CNC Chat => Show"N"Tell ( What you have made with your CNC machine.) => Topic started by: ant771 on June 18, 2007, 10:21:31 AM
-
This 8mm spacer is to intake manifold and allows to increase airflow of engine . Lot of work with measuring that round cornered cast-cover and making a picture to cad :/
(http://www.9xx-parts.com/misc/koroke1.jpg)
(http://www.9xx-parts.com/misc/koroke3.jpg)
-
Good job.
Brett
-
Nice