Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: Cartierusm on March 20, 2017, 12:15:53 PM

Title: Machine Pos Toggle How to Set as Zero?
Post by: Cartierusm on March 20, 2017, 12:15:53 PM

I'm trying to figure out how to be able to change the machine pos toggle in lathe to zero.

Here's my procedure - I turn on the machine > ref all axis > shouldn't both machine toggle pos and the regular DROs read zero. Neither one does; and I have very accurate limit switches. I can change the regular DRO, but not the Machine Pos Toggle.