Machsupport Forum
Mach Discussion => Mach4 General Discussion => Topic started by: crchisholm on February 27, 2017, 08:05:37 PM
-
I am just getting geared up with mach4hobby, PMDX 411, and g540. With my last setup, I used a cheap Amazon touch plate with a tinyG and had pretty good lick. Has anyone used this device with g540 and PMDX 411?. I saw an old promotion of th 411 that said support for touch plates was coming "very soon".
If you are using a touch plate with the g540 and PMDX 411, can you tell me how you set it up? Did you have to do any coding! ( I see the buttons for "touch" on the main screen of mach4, but pushing the button had no effect, probobly because it needs to be setup.
Thanks
Charlie