Machsupport Forum
Mach Discussion => Mach4 General Discussion => Topic started by: Ritmeester on February 27, 2017, 01:26:24 PM
-
I’m thinking to buy a Mach4 Hobby license but before I buy I need a few things to be sure.
- I have a new (dedicated) computer with Windows 10 64Bit
- I have a X6-1500C from Omiocnc with a USB connector
Does this combination work with Mach4 Hobby?
- Does Mach4 works with a screen resolution 1980 x 1080 ?
Thanks for any answers
Ritmeester
-
The Omiocnc web site makes no mention of Mach4 whatsoever, so I would
recommend contacting them to see if Mach4 support is available.
-
No the motion card on all the omio machines are only compatible with mach3...
It is however relatively easy to install something like the pokeys57cnc instead if you particularly want to use mach4.