Machsupport Forum

Mach Discussion => Brains Development => Topic started by: Fabio_Barbieri on February 06, 2017, 05:38:17 PM

Title: How to display data from the serial monitor on the Mach3 screen through arduino
Post by: Fabio_Barbieri on February 06, 2017, 05:38:17 PM
Good Night, my name is Fabio, I am building a laser cut, and to control some parameters I am using the arduino what I would like to do and display on the mach3 screen the temperature of the chiller water reservoir in the temperarure control at the TX output Is giving print on the serial monitor, how would you display this information on the screen of mach3, I am using an arduino modbus to communicate with mach3, sorry the bad inglish I used google translator