Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Naijin on January 04, 2017, 01:00:23 AM

Title: crosshair laser
Post by: Naijin on January 04, 2017, 01:00:23 AM
Hi there, is anyone using crosshair laser with 2010 screen set? if so can you please point me in the right direction, I can get the dro's to where the cross here position but  the spindle does not move, am I missing something in the set up or something, I thought that once you pressed the laser the spindle moved to that position, but in my case it does not.

Regards
Nick  ???