Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Moath on December 20, 2016, 07:20:47 AM
-
dears,
i need your advice please ..
I have problem in my CNC (FLEXICAM) machine , when I make homing ( the machine it's up to max limit so fast and stop )
I try again ( the machine its up so fast and down so fast to max limit and stop )
before the machine its up and down slowly
what the problem ??? ??? , help me please :'( :'(
Thank you
-
Post the following:
- XML file you are using
- What Mach version you are using?
- What screen set you are using?
- Have you read the manual or watched the video's?
- Post info about your machine.
Till then,
RICH
-
Thanks RICH for your replay
i have old machine ( FLIXCAM 3 axis model : 2002 )
and i have some photo and i can take more if you need << can you provide me you email address to contact with you if that possible
-
Post what was requested in my reply and others may respond.
Relative to machine info provide a link to the exact machine you have.
( Do not expect someone to spend their time looking through 15+ machines wondering what you have)
If you have questions please post them in this thread.
RICH