Machsupport Forum
G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: llamame_noel on December 13, 2016, 06:03:39 PM
-
I need help!!!!!
When I open a cogigo g on mach3, I can not see the complete model (only a small part of it). What am I doing wrong.
-
If you are using Mach3 in Demo Mode (Unlicensed) then it will only display the first 500 lines of Gcode.
Purchasing a license resolves this issue http://www.machsupport.com/shop/mach3/
Tweakie.