Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: chriscmac23 on December 04, 2016, 02:33:11 PM

Title: NEED HELP with G code for Canned Cycle??
Post by: chriscmac23 on December 04, 2016, 02:33:11 PM

 Write a main program and a subprogram for the following machining operation and turn in: a. First, drill 9 holes with tool# l and .257" drill on an Aluminum box tube, the Z-direction depth of the holes are .3 inches. Use right top corner as the program reference zero (PRZ). b. Then create 5/16 -18 NC threads using a tap as tool# 2 on those drill holes, the Z depth of the tapping is .6 inches.


The image is attached

Title: Re: NEED HELP with G code for Canned Cycle??
Post by: RICH on December 04, 2016, 03:03:18 PM

Why do you want someone else to do your homework?
Should have paid attention in class!

RICH