Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: OmenCues on November 21, 2016, 03:06:30 PM

Title: M5 not working
Post by: OmenCues on November 21, 2016, 03:06:30 PM

I'm sure there is an easy answer for this.  We had to replace our PC a week ago.  We reloaded everything and for the most part, everything works.
When using mach3turn however, we can't get m5 to start the spindle.  When we click on the spindle button, everything works as it should, it's just M5 won't start it.

Any ideas?????

Title: Re: M5 not working
Post by: TOTALLYRC on November 21, 2016, 05:33:38 PM

Try M03 to start and M05 to stop. M04 to reverse.