Machsupport Forum
Third party software and hardware support forums. => Promote and discuss your product => Topic started by: Cncdxffiles on October 11, 2016, 03:20:30 PM
-
Hello,
Just wanted to share an excellent new source of design work for your CNC cutting system.
-
Some more.
-
Excellent work and thanks for sharing.
Tweakie.
-
More
-
Here is another great design to share!
-
Hi Jason,
Thanks for sharing. The got flex would look great cut from vinyl and put on the side of a Jeep.
Mike
-
Thanks for the feedback, a lot of the design work that I share works well as a vinyl decal. I like the idea of the decal for the side of a Jeep.
-
Here is another design that might look well cut as a decal for a motorbike.
-
Glad you like the Artwork! Let me know if I can share more free design work on this thread. Thanks!
-
Don't recycle your scrap metal pieces. Use the drop outs to make money with designs like this one.
-
If you like the free files makes sure you post something to keep this thread active. Here's another great file I would like to share.
-
Now I need to get my vinyl cutter up and running, oh wait, first I have to clear some space to put it then get it up and running. The never ending challenge of keep the shop clean strikes again.
Mike
-
I operated a vinyl cutter and cut a lot of my own design work for a couple of years and it was a lot of fun. BTW, it's nearly impossible to keep a shop clean. Here's another file for anyone out there interested in cutting some CNC artwork with their cutting system. Enjoy! Also, If you like the free artwork please post a comment about it. Thanks!
-
Nice Artwork! Thanks for sharing Jason.
-
Thanks very much for commenting. Comments benefit the post and gets the post seen by more people on the forum. I'm sure there are a ton of other mach users that would like the opportunity to download these files.
-
Here is another great file to share! If you get a chance to cut any of the designs please share the finished product on this thread. Thanks!
-
If you enjoy the free files and want to see more please post on this thread so that more Mach users can benefit from the design work that is being shared. Thanks! Enjoy!
-
Here is another file that I just created. Once the design is cut you attach hinges to the seems so that it can contour around the fireplace. Enjoy! Please post your comments to keep this thread active. Thanks!
-
If you like free design work please post a comment to keep this thread up and running. Thanks!
-
Here's a nice Hot Rod Xing sign. Hope you like it!
-
Anyone have suggestions on the type of design work I should share next?
-
Here's another free file worth sharing. Enjoy!
-
If you get a chance to cut any of the free design work please attach a photo and share it on this thread. Thanks!
-
Here is a Welcome sign that was cut from one of the files I shared. Turned out Great!
-
Here is another great file worth sharing. Download this decorative mailbox topper and cut it out. Enjoy!
-
Please post your comments if you like the design work that I have been sharing. Thanks!
-
Here is another great file that I would like to share with everyone! Hope you like it.
-
Here is another great product that you can cut and create with your CNC cutting systems. This Mule Deer themed clock is designed to be cut around 34" wide. The clock face measures around 16" in diameter. I have included both a standard number and roman numeral style clock face in the cut file. Hope you all get a chance to cut this one out. You will need to order the clock motions separately to finish this product. The clock motions can be installed through the round backing plates and welded onto the clock frame.
-
Roman numeral 4 is represented as "IV" not "IIII" :D
-
Roman numeral 4 is represented as "IV" not "IIII" :D
True - but on clockfaces it is often not the case. http://www.web40571.clarahost.co.uk/roman/clockface.htm
Tweakie.
-
That's a nice article Tweakie.
I've known about "IIII" being used on clock faces to give a balanced look for years.
We have a 1770 vintage Grandfather clock and it has the "IIII" on the face.
-
Anyway, wrong :D