Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: BarryM on October 09, 2016, 01:50:36 PM

Title: steppers
Post by: BarryM on October 09, 2016, 01:50:36 PM

I just finished building my laser engraver I have a problem all 3 steppers travel in only one direction is there something in Mach 3 that I overlooked?

Title: Re: steppers
Post by: olf20 on October 09, 2016, 06:57:17 PM

Make sure you have your step and direction pins correct.
Easy to do.
olf20 / Bob