Machsupport Forum

Mach Discussion => Mach Screens => Screen designer tips and tutorials => Topic started by: ScrappyScooter on May 30, 2007, 01:36:14 PM

Title: Designer download
Post by: ScrappyScooter on May 30, 2007, 01:36:14 PM

Hello Ladies and Gents,

I am new to CNC and Mach3.
So allow me to introduce myself.
I'm using Mach3 to control a "robot", not a mill.
I've recently started planing Ping-Pong. I bought a ball machine that sits on the PP table and throws balls at you.
It has oscillation from side to side. But I wanted more.
I wanted the ball machine to be able to move across the table aiming the ball to specific areas and while adjusting the ball speed.
I've been able to do all of this with stepper motors and mach3.
It's been great fun learning about cnc and Mach3. There is definitely a place for milling in my life (you can check out another of my projects at ScrappyScooter.com).

Everything is working great. I would now like to make a custom screen.
The Screen Designer download link on Wiki is dead.

Is there another way to download the designer?

Thanks

Title: Re: Designer download
Post by: Graham Waterworth on May 31, 2007, 03:33:57 AM

Try this one.

http://www.artsoftcontrols.com/Downloads/Screen4.zip

Graham.