Machsupport Forum
Mach Discussion => Mach4 General Discussion => Topic started by: Durero on September 09, 2016, 11:02:44 PM
-
I'm hoping someone can walk me through the wiring for my mechanical home switches for my 3 axis router.
My router came with the three switches wired Normally Closed and connected to inputs 10, 11, 12 on the C25 and a common Ground on the C25. I could not get a reliable connection in Mach4 for all three switches with this wiring scheme.
Reading the manual for the C25 seemed to suggest that each switch should be wired from a 5V terminal on the C25 to its input terminal (10, 11, 12.) I tried this with a common 5V connection to all three switches but I'm still not seeing the correct behaviour in Mach4.
Any suggestions would be greatly appreciated.
-
Ah now I'm finding that the problem seems to be one of the switches itself, or its connecting wires.
-
Yup it was a faulty switch.