Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: francopuk on May 29, 2007, 03:06:15 PM
-
HI TO ALL I TESTING LAZYCAM WITH JPG IMAGE, AFTER LOADING AND DEFINED THE PARAMETER THE PROGRAM STOP RUN
ONE MESSAGE REPORT "THE PROGRAM NOT RESPOND"
WHAT IS THE PROBLEM ?
THANK IN ADVANCE
Franco
-
Hi, Franco
If that's the Msg. your getting, Check your Windows Task Manager, You'll see even though it say's Not Responding LazyCam is still crunching your file.
Look under Performance Tab, CPU Usage willl be at 100 % These files are usually pretty big and take a some time to sort out.
One other thing to check, Make sure that Mach is Stopped and Reff. to Home, It uses allot of CPU Time when it's Running.( Hear Anyway for me).
Hope this Helps, Chip
-
THANK FOR REPLY, THE PROBLEM IS THE DIMENSION OF FILE, IF FILE IS < 100K THE WORK IS CORRECT
IF GREATHER 500K AFTER 10" OUT MESSAGE "lazycam not responding"
MY PC IS P4 1,6MHz AND 512 MB RAM
Franco
-
Hi, Franco
I was running with 256 K on a 1.666 Comp. hear, Put in 1.256 K now, Makes a big Difference, Many program's open, Mem dosn't seem to ever get above 800k.
Some file's are Huge and thy take time to Crunch.
Post your File.
Thanks, Chip