Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: Christine88 on August 28, 2016, 03:47:37 PM

Title: Jumpers on smoothstepper
Post by: Christine88 on August 28, 2016, 03:47:37 PM

Which jumpers do I need to set on the ESS smoothstepper when a C25S BOB is plugged in so that the C25S gets power?

Title: Re: Jumpers on smoothstepper
Post by: DazTheGas on August 29, 2016, 03:39:45 AM

You can find the manual for your bob here http://cnc4pc.com/Tech_Docs/C25SR1_USER_MANUAL.pdf and the jumpers are explained in section 4

DazTheGas