Machsupport Forum

Mach Discussion => Mach Screens => Topic started by: Christine88 on August 12, 2016, 10:09:34 PM

Title: Need 5-axis screen for my micro 5-axis CNC
Post by: Christine88 on August 12, 2016, 10:09:34 PM

Hi all,  I built a tiny 5-axis CNC that I want use Mach3 to control.  The 6-axis that Artsoft has for download is missing most of the buttons and I think it must be non compatible with Windows 7.  Does anyone know where to get a 5-axis screen that actually works?

Title: Re: Need 5-axis screen for my micro 5-axis CNC
Post by: Tweakie.CNC on August 13, 2016, 02:19:16 AM

Download the 6 axis screen http://www.machsupport.com/software/downloads-updates/screensets/
Unzip the folder.
Copy the file 6axis.set into your Mach3 folder.
Copy the folder UT Buttons-JPG into your Mach3 / Bitmaps / MillBitmaps folder.

If you do it correctly then you will have all the buttons  ;)

Tweakie.

Title: Re: Need 5-axis screen for my micro 5-axis CNC
Post by: Christine88 on August 13, 2016, 09:21:43 AM

That worked thank you so much.