Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: armature on July 21, 2016, 10:33:54 AM

Title: Mach4 Z- axis jogging problem
Post by: armature on July 21, 2016, 10:33:54 AM
hi Guys,

 i'm using Ethernet SmoothSteppers (ESS) motion controller, C25 - Smooth Stepper Terminal Board,   plug in build 186, MACH4 V 4.2.0.2914, and Windows 10
i have problem with Z- axis, when i'm doing homing it's just move small movement then stop before touch the limit switch
even when i do jogging  it's just move small movement then stop then machine hang and never move, after that i have to close mach4 and power off/on the CNC.