Machsupport Forum

Third party software and hardware support forums. => dspMC/IP Motion Controller => Topic started by: Johnny boy on July 19, 2016, 08:45:13 AM

Title: UC 100 motion controller
Post by: Johnny boy on July 19, 2016, 08:45:13 AM

Hullo,I'm new to cnc and need help. I receintly bought a 20/30 cnc router (Chinese) with mach3/lazycam.Using laptop. I bought a uc100 and downloaded the driver.
When installing the driver there was no dialogue box to choose parallel port or UC 100.also should the blue light on the UC100 be lit.   Thankyou  Johnny boy

Title: Re: UC 100 motion controller
Post by: Johnny boy on July 21, 2016, 04:55:21 AM

I've done a lot more research and have solved that piece of the puzzle. Now looking to try and get my emergency stop working before using the machine proper.

I may have to come back

Thanks