Machsupport Forum
Mach Discussion => Mach4 General Discussion => Topic started by: Giacomo Ferraro on July 05, 2016, 10:43:02 AM
-
Hello,
I 'm developing vb.net application connected with Mach4.
I need to force "Load Gcode" command from my vb.net application.
With Mach3 software I solved the problem writing in a macro "LoadFile("C:\Mach3Program\Coating\CC.NC")"
and setting "Config>General config>Initialization String" with macro number.
After first reset the file is automatically load.
I can not find the same function (or better one) in Mach4.
Can someone help me?
Thank's!