Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Bill I on July 01, 2016, 07:36:59 PM

Title: Settings screen not active
Post by: Bill I on July 01, 2016, 07:36:59 PM

Using mach3 latest version USB Smooth Stepper. When In open up the setting screen and attempt to use the Axis calibration to set the steps per unit I click on the button and then click any axis I am prompted to enter the distance I enter the distance click OK nothing happens. I pushed the arrow keys to move any axis nothing moves.  Also the reset is not activated. What do I need to do to get he Settings screen to work?
Thanks Bill

Title: Re: Settings screen not active
Post by: Bill I on July 05, 2016, 08:19:09 AM

Found the problem !!

Had to change the power management in the USB port.