Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: cnc_gig on July 01, 2016, 01:13:51 PM

Title: mach 3 spindle rpm display
Post by: cnc_gig on July 01, 2016, 01:13:51 PM
Hi all,

I am on the new version of Mach 3. I have fully configured the sofware. I have a spindle motor with index. I get the rpm display but it is doubled becaus on this spindle there is 2 impluse per turn.

I get a another weird problem : when I try to calibrate spindle, the motor stops and never restarts ...

Best

Title: Re: mach 3 spindle rpm display
Post by: cnc_gig on July 05, 2016, 12:01:02 PM
up please !