Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: bc201081 on June 26, 2016, 08:26:52 PM

Title: Fusion360 Plasma Post Processor
Post by: bc201081 on June 26, 2016, 08:26:52 PM
Does anyone have a Mach3 Plasma Post Processor for Fusion360 that they would share? I have previusly been using Lazycam with a modified Plasma Post Processor which uses a G31 & G90 command to Probe the plate & set Z height to zero. I'm keen to try the Waterjet/laser/plasma CAM feature in Fusion 360 but I need a plamsa post processor for Mach3. Any help or advice would be much appreciated.