Machsupport Forum
Third party software and hardware support forums. => Promote and discuss your product => Topic started by: Steve Stallings on June 24, 2016, 07:53:14 PM
-
The new PMDX-412 SmartBOB-MiniUSB motion controller for Mach4 is now shipping.
(http://www.pmdx.com/Images/PMDX-412P_400.JPG)
For details see: http://www.pmdx.com/PMDX-412 (http://www.pmdx.com/PMDX-412)
This new controller offers the simplest, lowest cost way to create a Mach4
machine controller.
It provides the controller, pulse engine, breakout board, and plug-in terminal
strips. External breakout boards or terminal strips are not needed.
It can self mount directly to the wall of your control enclosure and includes
a dress panel for the outside of the enclosure.
The I/O available is equivalent to one parallel port and includes 4 axis step
and direction outputs, 4 logic level output signals, and 5 input signals including
the E-Stop function.
The output signals can be used with our PMDX-104 relay board or with
solid state relays.
The inputs accept mechanical switches, NPN sensors, or 5 volt logic signals.
PNP sensors can be used by adding our PMDX-105 board.
VFD spindle inverters can be controlled by adding our PMDX-407 board.
Stay tuned for more SmartBOB products in the future.
Steve Stallings
www.PMDX.com