Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: W.Jansen on May 23, 2007, 03:02:56 AM

Title: Zoom box
Post by: W.Jansen on May 23, 2007, 03:02:56 AM
Hi Brian

Just a litle report.
If i select ZOOM BOX on the right side of the screen and i hit with the left mouse button one's , a point on the screen (without moving the mouse) my image is disappeared.

Greetings:
W.Jansen
Title: Re: Zoom box
Post by: klmark on May 23, 2007, 12:23:33 PM
Hi
 Hold down the left mouse button and drag across the part you want to zoom in.That should work
Title: Re: Zoom box
Post by: W.Jansen on May 23, 2007, 12:33:53 PM
Hi Klmark

Yes i know thats how to do it but i meant if i forgot to drag and just release the mouse button then my object is gone.
Thats a big punish for such a smal mistake.

Greetings:
Willem
Title: Re: Zoom box
Post by: klmark on May 23, 2007, 02:26:48 PM
Hi
Because it is zoom in so big you think it is but it ant Just double click the left mouse it will bring it back to orig seize 
Title: Re: Zoom box
Post by: W.Jansen on May 23, 2007, 02:40:08 PM
Ah why did i not think of that.
Thanks Klmark.

Greetings:
Willem
Title: Re: Zoom box
Post by: Brian Barker on May 27, 2007, 08:38:45 PM
sounds like it is all fixed ;)
Title: Re: Zoom box
Post by: W.Jansen on May 28, 2007, 11:44:17 AM
Hi Brian

Yes the problem is solved but it would be nice if a minimum size of the zoombox is required to activate the action.

Greetings:
Willem