Machsupport Forum

Third party software and hardware support forums. => CS-Lab => Topic started by: jon8949 on June 14, 2016, 04:47:17 PM

Title: CNC Router Retrofit to CSMIO/IP-S
Post by: jon8949 on June 14, 2016, 04:47:17 PM
I'm in the process of retrofitting a 1212 CNC Router motion control to CSMIO/IP-S.  The machine is currently up an running with the import BOB.  I just need to verify connection to the VFD. I'm currently able to control spindle on/off and spindle rpm.

Here is the current BOB connections.
BOB         VFD
0-10v        AI
GND         CM
COM         CM
P2            FWD

Here is what I believe it needs to be on with CSMIO/IP-S.  Please help me if this is not correct.

IP-S                             VFD
Analog 0-10v (Pin 1)       AI
GND (Pin 2)                   CM
Digital Out 0V(Pin14)      CM
Digital Out 0 (pin 0)        FWD

Thanks, Jon