Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: rgsparber on May 20, 2016, 12:10:21 PM
-
Commercial CNC mills typically have a home position which defines a physical location. This is the center of rotation of the spindle with respect to some feature on the table. I did buy some nice home switches for my little hobby CNC mill but was not happy with their repeatability. This article presents a low tech method to accomplish this same goal.
If you are interested, please see
http://rick.sparber.org/HSH.pdf
Your comments are welcome. All of us are smarter than any one of us.